- PRODUCT CENTER
- Stone crushing machine
- Sand making machine
- Powder making machine
- Ore dressing machine
- Cement Production Line
Gold shaking table shaker
Shaking Table Introduction:
Table concentrator or shaking table is a ore selecting machine for fine materials working by gravity. It is mainly used in various metal beneficiations for roughing, fine selection and scavenging, such as iron, manganese, gold,tungsten, lead, tin, chromium, titanium, bismuth, tantalum and other non-ferrous metals with level of 2-0.02 mm ore sand and sludge ores, or ferrous metals, or rare metal minerals; in addition, it is also applied in selection of 4-0.02 mm pyrite. If the type of the bed is appropriately changed, shaker table can be applied in the selection of fine coal, coal slime, and other mixed materials mixed by materials with different gravity and grain sizes. Therefore, the gold shaking table shaker can select materials with different grain sizes, such as rough sand, fine sand and sludge ores. Henan Hongxing has witnessed the history of shaking table. From the initial straight bed shaker and single-curvelet bed jerking table to the double-curvelet bed jerking table, Hongxing has taken great efforts on innovation and research. Now compared with other machines, new table concentrator produced by Hongxing have advantages of higher handling capacity, recovery rate and concentration ratio.
Beneficiation of shaking table is a process that minerals are sorted by different densities.
ore concentrator are loosely layered on the slant bed surface under the united impact of symmetric reciprocating motion of mechanical stone and action of water on thin bevel layer, thus the whole process can be realized.
Structure of the concentrator table is simple and compact, easy to operate; bed surface is made up of double-curvelet bed which has developed the machine with large processing capacity, high recovery rate, high enrichment, and high separation efficiency; the spring device that controls movement of the chassis is installed inside the bed cabinets, so that machine stroke can be adjusted and rapid production operations can be realized. The machine can work stably and enduringly.